-20%

Teddy Bear Camera With USB Receiver

Product Code: SKU-134
Availability: In Stock
Sale price:€199.99
Old price:€249.99
You save:€50.00
Hurry! only 1000000 item(s) left! 0 item(s) already purchased!
-+

Teddy Bear Camera With USB Receiver

Wireless Teddy Camera
This cute teddy bear is fitted with a  colour camera and transmitter which transmits both audio and video to the supplied receiver. The receiver can be placed up to 100 metres away line of sight  from the camera and simply plugs into your VCR or TV via the SCART or PHONO Plugs.  As no wires are required between camera and receiver this device lends it self to many use in a variety of situations such as monitoring child minders.
 2.4 GHz Mini. Transmitter W/Colour Camera                                                                                                                            
RF output power:           CE & BZT compliant                               
Operating power:            4.8-7.2V
Power consumption:       100mA                                                               Antenna:                          Omni-directional antenna                          
Transmitting range          100 M (Line-Of-Sight)                             
Weight:                            11 grams


  Colour Camera  Specs

1) Pixels: 365K (PAL), 250K (NTSC)

2) Resolution: Horizontal 380 TV Lines

3) Auto Electronic Exposure: 1/60 —1/2000 sec.

4)  Automatic Exposure/Gain/White balance.

5) Mini. Illumination: <3 Lux f 1.2

6) Pin Hole Lens: 5.6mm! field angle: 60 degrees

Note  Best results are achieved where there is clear “line of sight” between the mini camera transmitter and the receiver. Try to avoid obstacles such as trees, walls, cars, trucks and buildings. Transmitting over water and in the rain will reduce performance. Interference from certain electronic equipment or the moving human body can also effect the range obtainable.

For best reception position the antennas of the transmitter and receiver 4.5 to 6 feet (1.5 to 2m) above the ground. Please test all devices before final installation because the transmission quality can often be improved by moving the components slightly. Turn off the transmitter and receiver if the system is not in use. Do not touch the antennas when the system is switched on. Do not place the receiver behind a monitor


 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Website design by Webstop